HOT

2.5” SSD Lite M3B

2.5” SSD Lite M3B is a SATA III 6Gb/s MLC valued-priced SSD. For the consideration of adequate storage capacity and non-ruggedized aluminum extrusion case, 2.5" SSD Lite M3B series offer one of the lowest SSD price tags on the market for various consumer and embedded applications.

  • Compliant with SFF-8201 specification.
  • SATA lll interface running at up to 6Gb/s.
  • SLC/StrongMLC/MLC versions in standard, extended, and industrial grade temperature ranges.
  • Cost-effective alternative 2.5" SSD solution.
  • Aluminum extrusion case with 7mm height mechanical design.
  • SMARTPro device monitoring tool or SDK library support.
Wide Temperature Ranges

Wide Temperature Ranges

MemxPro’s products perform perfectly in high/low temperatures. They are rigorously tested to perform at industrial grade (-40 to 85 °C), and at extended grade (-25 to 85°C)  - ranges much wider than standard grade (0 to 70°C).

Dust and Water Resistant though Conformal Coating

Dust and Water Resistant though Conformal Coating

According to customer’s requirement, MemxPro can apply a special protective coating on selected products against moisture, dusts, and chemical contaminants; preventing short circuits and corrosion.

30µ” Gold Finger Thickness

30µ” Gold Finger Thickness

Gold fingers are gold-plated card-edge connectors resistant to wear agaist repeated insertion. MemxPro designs our embedded storage module with 30µ” gold finger thickness for better signal quality.

ESD and EMI Protection

ESD and EMI Protection

MemxPro’s products are designed to comply with Electrostatic Discharge (ESD) and Electromagnetic Interface( EMI) standards.

Device Sleep Mode (DEVSLP)

Device Sleep Mode (DEVSLP)

This power save mode targets only 5mW or less, allowing the product to go into sleep mode when inactive; reducing power consumption and heat generation when it is not in use.

Power Plus

Power Plus

During an unexpected power failure, the intelligent firmware and hardware design implemented by MemxPro prevents data loss and ensures data integrity.

SMARTPro

SMARTPro

SMARTPro is a MemxPro's utility which is designed to provide product details and S.M.A.R.T. information. Our customers are able to monitor health, temperature and the lifespan of each installed disk in the system.

Thermal Sensor

Thermal Sensor

The sensor in a controller can measure temperature through a product to enhance its data integrity. With SMARTPro, customers can monitor the temperature of MemxPro's SSD inside their system.

TRIM

TRIM

The TRIM command allows the OS to tell SSD which blocks of data are no longer in use and can be erased. This enhances write performance by releasing space.

Wear Leveling

Wear Leveling

Wear Leveling algorithms and bad block detection schemes are used to extend life span and efficient utilization of the NAND flash memory.

Write Protect

Write Protect

Optimized by software or hardware, the write protection can be set up for read-only permission to avoid data overwriting.

Data Encryption

Data Encryption

To prevent data theft, an Advanced Encryption Standard (AES 256-bits) algorithm is used for the encryption and decryption of data and specific keys are required to encrypt and decrypt the data.

Secure Erase

Secure Erase

The secure erase command instructs SSD controller to write 1 to all of the blocks for data seccurity. Even if the device is powered off after a secure erase command has been issued, the process will continue after power has been restored.

Data Self-destruction

Data Self-destruction

SSD with data self-destruction function is capable of physically destroying itself and making data permanently inaccessible in a controlled and triggered manner.

Shock & Vibration Resistant

Shock & Vibration Resistant

MemxPro's rugged SSD series has passed military standard MIL-STD-810G rigorous tests to ensure its operation in severe shock and vibration.

Specifications

Interface SATA III
Form Factor 2.5" SSD Lite (SFF-8201)
Flash Type MLC
Max. Channel 4
Density 16GB~512GB
Sequential R/W (MB/sec, max.) 505/331
Operating Temperature 0°C~+70°C/-25°C~+85°C/-40°C~+85°C
Max. Power Consumption 2.75W (5Vx550mA)
Dimension (LxWxH/mm) 100x69.85x6.8
Operating Voltage 5V±5%
Storage Temperature -55°C~+95°C
External DRAM Buffer N/A
Thermal Sensor
DEVSLP Mode <5mW
ATA Security
S.M.A.R.T.
TRIM
Vibration 20G (7~2KHz)
Shock Resistance 1500G@0.5ms
MTBF >3 million hours

Related Information

File Type Documentation Size Format
Product DM 2.5” SSD Lite Product DM 413KB PDF