SATA Module II
M3B-A

SATA Module II M3B-A is a 7-pin SATA III 6Gb/s MLC miniaturized flash module with hardware Write Protect function. Easy plug & play installation for fast access, its small footprint is ideal for space-limited embedded systems and mobile applications.
  • 7-pin 90-degree and 180-degree SATA connector designs. 
  • SATA lll interface running at up to 6Gb/s.
  • MLC version in standard, extended, and industrial grade temperature ranges.
  • Small form factor with housing or no housing design.
  • Global wear leveling, bad block management with built-in ECC, and optional security features.
  • SMARTPro device monitoring tool or SDK library support.
Wide Temperature Ranges

Wide Temperature Ranges

MemxPro’s products perform perfectly in high/low temperatures. They are rigorously tested to perform at industrial grade (-40 to 85 °C), and at extended grade (-25 to 85°C)  - ranges much wider than standard grade (0 to 70°C).

Dust and Water Resistant though Conformal Coating

Dust and Water Resistant though Conformal Coating

According to customer’s requirement, MemxPro can apply a special protective coating on selected products against moisture, dusts, and chemical contaminants; preventing short circuits and corrosion.

Shock & Vibration Resistant

Shock & Vibration Resistant

MemxPro's rugged SSD series has passed military standard MIL-STD-810G rigorous tests to ensure its operation in severe shock and vibration.

Write Protect

Write Protect

Optimized by software or hardware, the write protection can be set up for read-only permission to avoid data overwriting.

Quick Erase

Quick Erase

The quick erase command instructs SSD controller to write 1 to all of the blocks for data security. Even if the device is powered off after a quick erase command has been issued, the process will continue after power has been restored.

Data Encryption

Data Encryption

To prevent data theft, an Advanced Encryption Standard (AES 256-bits) algorithm is used for the encryption and decryption of data and specific keys are required to encrypt and decrypt the data.

Data Self-destruction

Data Self-destruction

SSD with data self-destruction function is capable of physically destroying itself and making data permanently inaccessible in a controlled and triggered manner.

Power Plus

Power Plus

During an unexpected power failure, the intelligent firmware and hardware design implemented by MemxPro prevents data loss and ensures data integrity.

OCP/OVP

OCP/OVP

Equipped with a built-in OCP (Over Current Protection) and OVP (Over Voltage Protection) IC, the SSD is able to shut down power to protect its data when encountering abnormal currents and voltages.

30µ” Gold Finger Thickness

30µ” Gold Finger Thickness

Gold fingers are gold-plated card-edge connectors resistant to wear agaist repeated insertion. MemxPro designs our embedded storage module with 30µ” gold finger thickness for better signal quality.

MLC Plus

MLC Plus

MemxPro MLC Plus firmware technology reserves more spare blocks in an MLC SSD. With this extra overprovisioning, the write amplification of the SSD becomes lower for better reliability and endurance.

Device Sleep Mode (DEVSLP)

Device Sleep Mode (DEVSLP)

This power save mode targets only 5mW or less, allowing the product to go into sleep mode when inactive; reducing power consumption and heat generation when it is not in use.

SMARTPro

SMARTPro

SMARTPro is a MemxPro's utility which is designed to provide product details and S.M.A.R.T. information. Our customers are able to monitor health, temperature and the lifespan of each installed disk in the system.

Thermal Sensor

Thermal Sensor

The sensor in a controller can measure temperature through a product to enhance its data integrity. With SMARTPro, customers can monitor the temperature of MemxPro's SSD inside their system.

TRIM

TRIM

The TRIM command allows the OS to tell SSD which blocks of data are no longer in use and can be erased. This enhances write performance by releasing space.

Wear Leveling

Wear Leveling

Wear Leveling algorithms and bad block detection schemes are used to extend life span and efficient utilization of the NAND flash memory.

ESD and EMI Protection

ESD and EMI Protection

MemxPro’s products are designed to comply with Electrostatic Discharge (ESD) and Electromagnetic Interface( EMI) standards.

Specifications

Interface SATA III SATA III
Form Factor 7pin (90°) 7pin (180°) 7pin (180°) with housing
Flash Type MLC MLC
Max. Channel 2 2
Density 16GB~128GB 16GB~128GB
Sequential R/W (MB/sec, max.) 348 /101 348 /101
Operating Temperature 0°C~+70°C/-25°C~+85°C/-40°C~+85°C 0°C~+70°C/-25°C~+85°C/-40°C~+85°C
Max. Power Consumption 1.25W (5Vx250mA) 1.25W (5Vx250mA)
Dimension (LxWxH/mm) 34.8x23.0x12.5 39.6x23.0x7.5 40.4x24.4x8.0
Operating Voltage 5V±5% 5V±5%
Storage Temperature -55°C~+95°C -55°C~+95°C
External DRAM Buffer N/A N/A
Thermal Sensor
DEVSLP Mode N/A N/A
ATA Security
S.M.A.R.T.
TRIM
Vibration 20G (7~2K Hz) 20G (7~2K Hz)
Shock Resistance 1500G@0.5ms 1500G@0.5ms
MTBF 3 million hours 3 million hours